{"product_id":"jbl-pd6322-43-speaker","title":"JBL PD6322\/43 Speaker","description":"\u003ch2\u003eJBL PD6322\/43 Dual 12-inch 3-Way Horn-Loaded Speaker with 40° x 30° Horn\u003c\/h2\u003e\n\u003cp\u003ePrecision Directivity Full Range Three-Way Loudspeakers. The PD6322 Precision Directivity full range, three-way loudspeakers are designed for applications requiring high output sensitivity with excellent pattern control. They can be utilized standalone in demanding music or speech systems where low frequency extension to 40 Hz is required.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo high power 300 mm (12 in) transducers in a compact slot-loaded configuration for low frequency extension to 40 Hz.\u003c\/li\u003e\n\u003cli\u003eHigh power CMCD™ Cone Midrange Compression Driver provides high sensitivity and high continuous SPL capability along with low distortion, extended bandwidth and improved phase coherence.\u003c\/li\u003e\n\u003cli\u003eLarge format neodymium HF driver provides clear, intelligible high frequency projection.\u003c\/li\u003e\n\u003cli\u003eLarge PT™ Progressive Transition™ waveguides provide consistent pattern control, low distortion at high SPL levels and smooth frequency response.\u003c\/li\u003e\n\u003cli\u003eRotatable mid and high frequency waveguides allow either horizontal or vertical cabinet orientation.\u003c\/li\u003e\n\u003cli\u003eSophisticated, steep-slope passive mid high crossover network with switchable tri-amp\/bi-amp crossover modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Range: 41 Hz to 17 kHz (-10 dB)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 49 Hz to 15 kHz ( ± 3 dB)\u003c\/li\u003e\n\u003cli\u003eCoverage Pattern: 40° x 30°\u003c\/li\u003e\n\u003cli\u003eCrossover Modes: Tri-amp \/ Bi-amp (passive mid-high) switchable\u003c\/li\u003e\n\u003cli\u003ePassive Crossover:6th order (36 dB\/oct) Linkwitz-Riley HP \u0026amp; LP, 1.5 kHz\u003c\/li\u003e\n\u003cli\u003eTransducer Power Rating (AES): LF: 1600 W (6400 W peak), 2 hrs. 1200 W (4800 W peak), 100 hrs MF: 350 W (1400 W peak), 100 hrs HF: 75 W (300 W peak), 2 hrs\u003c\/li\u003e\n\u003cli\u003eLong-Term System Power Rating (IEC): LF: 1200 W (4800 W peak) MF\/HF: 300 W (1200 W peak), 100 hrs\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: LF: 128 dB SPL (134 dB peak) MF: 137 dB SPL (143 dB peak) HF: 135 dB SPL (141 dB peak) Passive Mode: 136 dB SPL (142 dB peak)\u003c\/li\u003e\n\u003cli\u003eSystem Sensitivity(1W @ 1m): Passive Mode: 111 dB-SPL (mid\/high section only)\u003c\/li\u003e\n\u003cli\u003eLow Frequency Driver: 2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil\u003c\/li\u003e\n\u003cli\u003eMid Frequency Driver: CMCD-82H cone midrange compression driver with integral 200 mm (8 in) diameter Differential Drive® dual 75 mm (3 in) voice coil driver\u003c\/li\u003e\n\u003cli\u003eHigh Frequency Driver: 2432H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice coil\u003c\/li\u003e\n\u003cli\u003eEnclosure: Trapezoidal with 12.5 degree side angles, 16 mm (.625 in) exterior grade 11-ply Finnish birch plywood.\u003c\/li\u003e\n\u003cli\u003eSuspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).\u003c\/li\u003e\n\u003cli\u003eFinish: Black DuraFlex™ finish. White (-WH) available upon request.\u003c\/li\u003e\n\u003cli\u003eOptional Weather Resistant Versions: WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperature.\u003c\/li\u003e\n\u003cli\u003eGrille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)\u003c\/li\u003e\n\u003cli\u003eInput Connectors: Neutrik Speakon® NL8, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.\u003c\/li\u003e\n\u003cli\u003eEnvironmental Specifications: Mil-Std 810; IP-x3 per IEC529\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D in vertical orientation): 991 x 673 x 897 mm (39.0 x 26.5 x 35.3 in)\u003c\/li\u003e\n\u003cli\u003eNet Weight: 87.3 kg (192 lb)\u003c\/li\u003e\n\u003cli\u003eOptional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JBL Professional","offers":[{"title":"New","offer_id":53437500752237,"sku":"PD6322-43","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/3224\/8429\/files\/PD6322-43.jpg?v=1781259983","url":"https:\/\/www.corporateav.ae\/products\/jbl-pd6322-43-speaker","provider":"Corporate AV","version":"1.0","type":"link"}