d&b audiotechnik

d&b audiotechnik 10D Installation Specific Four Channel Amplifier

Model Z2760.500

Price on Request

Availability: In Stock

WhatsApp an Expert

Call an Expert: +971 56 498 8088 info@corporateav.ae

  • Installation specific four channel amplifier
  • Article number: Z2760.500
  • Authorized d&b audiotechnik Reseller
  • Manufacturer Warranty
  • Fast UAE Delivery
  • Expert Project Support
Delivery, Warranty, Returns and Installation
Delivery
Fast UAE Delivery: Same-Day or Next-Day Delivery Available, Subject to Product Availability and Location. Free Delivery on Orders Above AED 2,000.
Warranty
Manufacturer Warranty with Local UAE Support where applicable.
Returns
B2B Orders are non-returnable. Please confirm product specifications and compatibility before ordering.
Installation
Site Surveys, System Design and Professional Installation are available across the UAE.
Call

Product details

Overview

What is the d&b audiotechnik 10D?

The d&b audiotechnik 10D is a installation specific four channel amplifier.

The 2 RU, four channel 10D amplifier is designed for permanent integration with applications that require lower Sound Pressure Level (SPL) capabilities. This device contains extended input management functionalities with separate Input Gain control for each input channel, General Purpose Inputs/Outputs (GPIO) and a General Fault connector.

Why this product

Key Benefits

  • Output power

    The d&b audiotechnik 10D delivers 4 x 700 W into 4 Ω.

  • Signal processing

    Built-in DSP with 2 x 16-band PEQ/notch/shelving/asymmetric, 0.3 ms latency.

  • Inputs

    Analog inputs on 3-pin Phoenix Euroblock male and digital AES3 inputs on 3-pin Phoenix Euroblock male, AES3.

  • Network control

    Remote control and monitoring over 2 x RJ 45, 10/100 Mbit Ethernet.

Use cases

Applications

  • Live and installed sound

    Speech and music reinforcement with d&b audiotechnik systems.

Technical details

Technical Specifications

System

Equalizer
2 x 16-band PEQ/notch/shelving/asymmetric
Delay setting
0.3 ms to 10 s
Configurations
Current d&b loudspeakers (except SL-Series, J-Series, V-Series, B2-SUB, M2 monitor) and linear mode
SRC (Sample rate converter)
Selectable for AES 1/2 and 3/4
Sampling rate
96 kHz/27 Bit ADC/24 Bit DAC
Sampling Digital AES/EBU
48 kHz/96 kHz
Type
Universal range switched mode power supply with active power factor correction (PFC)

Frequency

Frequency generator
Pink noise or Sine wave 10 Hz to 20 kHz

Power

Mains connector
powerCON
Maximum output power per channel (THD+N
4 x 700/350 W / 4 x 700/350 W
Rated mains voltage
100 to 240 V, 50 to 60 Hz

Connectivity

Latency analog and digital inputs
0.3 ms
INPUT ANALOG (A1 - A4)
3-pin Phoenix Euroblock male
ANALOG LINK (A1 - A4)
3-pin Phoenix Euroblock male
INPUT DIGITAL (D1/2, D3/4)
3-pin Phoenix Euroblock male, AES3
DIGITAL LINK (Output)
3-pin Phoenix Euroblock male
Mix TOP/SUB / 2-Way Active output A/B and C/D
2 x 4-pin Phoenix Euroblock female
GPIO (General Purpose Input Output)
1 x 6-pin Phoenix Euroblock male
Ethernet
2 x RJ 45, 10/100 Mbit Ethernet
Speaker outputs A/B/C/D
2 x 4-pin Phoenix Euroblock female
S/N ratio (unweighted, RMS) / Analog input / Digital input
> 101 dBr / > 103 dBr

Physical

Dimensions (H x W x D)
2 RU x 19" x 435 mm/17.1"
Weight
10.6 kg / 23.4 lb

All orders are final sale. Read our Refund policy.

Expert FAQs

What is the d&b audiotechnik 10D?

The d&b audiotechnik 10D is a installation specific four channel amplifier. The 2 RU, four channel 10D amplifier is designed for permanent integration with applications that require lower Sound Pressure Level (SPL) capabilities. This device contains extended input management functionalities with separate Input Gain control for each input channel, General Purpose Inputs/Outputs (GPIO) and a General Fault connector.

How powerful is the d&b audiotechnik 10D?

d&b audiotechnik lists the 10D at 4 x 700 W into 4 Ω.

What signal processing does the d&b audiotechnik 10D have?

The 10D has 2 x 16-band PEQ/notch/shelving/asymmetric equalisation, 0.3 ms latency for analog and digital inputs and a delay range of 0.3 ms to 10 s, with d&b loudspeaker-specific setups.

What inputs does the d&b audiotechnik 10D have?

The 10D has analog inputs on 3-pin Phoenix Euroblock male and digital AES3 inputs on 3-pin Phoenix Euroblock male, AES3.

Can the d&b audiotechnik 10D be controlled over a network?

Yes. The 10D has 2 x RJ 45, 10/100 Mbit Ethernet connections for remote control and monitoring with d&b software.

How big and heavy is the d&b audiotechnik 10D?

Dimensions are 2 RU x 19" x 435 mm/17.1". It weighs 10.6 kg / 23.4 lb.

What is the part number of the d&b audiotechnik 10D?

Z2760.500 is the d&b audiotechnik article number for this 10D listing.

Where can I buy the d&b audiotechnik 10D in the UAE?

CorporateAV.ae is a supplier of genuine d&b audiotechnik products in the UAE, including the d&b audiotechnik 10D, with same-day or next-day delivery subject to availability. Request a project quote, call +971 56 498 8088 (+971 56 498 8088), WhatsApp us or email info@corporateav.ae (info@corporateav.ae).