Dynacord

Dynacord C2800FDi 2-Channel DSP Install Power Amplifier, 2 x 1400 W

Model C2800FDiMPN F.01U.314.189

Price on Request

Availability: In Stock

WhatsApp an Expert

Call an Expert: +971 56 498 8088 info@corporateav.ae

  • 2-channel DSP install power amplifier, 2 x 1400 W (2800 W total)
  • Connections: Euroblock in/out, USB control, GPIO (power/preset)
  • DSP: Yes (FIR Drive)
  • Rack space: 2 RU
  • Authorized Dynacord Reseller
  • Manufacturer Warranty
  • Fast UAE Delivery
  • Expert Project Support
Delivery, Warranty, Returns and Installation
Delivery
Fast UAE Delivery: Same-Day or Next-Day Delivery Available, Subject to Product Availability and Location. Free Delivery on Orders Above AED 2,000.
Warranty
Manufacturer Warranty with Local UAE Support where applicable.
Returns
B2B Orders are non-returnable. Please confirm product specifications and compatibility before ordering.
Installation
Site Surveys, System Design and Professional Installation are available across the UAE.
Call

Product details

Overview

What is the C2800FDi?

The Dynacord C2800FDi is a 2-channel DSP install power amplifier from the Dynacord C series.

The C2800FDi runs a 2 x 1400 W Class-H output stage, efficiency that earns its rack space, with the C-Series install DSP: FIR filters, per-channel PEQ, output delay, and load-impedance monitoring. Direct-drive 70 V/100 V feeds distributed lines, and the protection suite and three-stage cooling hold it steady under sustained load.

Why this product

Key Benefits

  • Install power

    Dynacord lists: 1400 W per channel into 4 ohm with integrated FIR Drive processing.

  • Low-impedance operation for

    Low-impedance operation for 2/4/8 ohm speaker systems, 70V/100V direct drive.

  • Set up in SONICUE (USB)

    Levels, EQ, speaker settings with FIR filters, PEQ, delay, and limiters.

  • Install-ready connections

    Euroblock in/out and GPIO for remote power and preset select.

  • Reliable in the rack

    Full protection suite with 3-stage front-to-rear cooling.

Use cases

Applications

  • Retail and hospitality

    zoned sound with processing built in, for shops, restaurants and hotels.

  • Houses of worship

    speech and music over distributed or low-impedance speaker lines.

  • Venues and campuses

    fixed installs that need level, EQ and delay control from one rack.

Technical details

Technical Specifications

System

Sample Rate
48 kHz
DSP
Yes (FIR Drive)
DSP Processing
FIR-Drive (6 PEQs, x-over, delay,limiters), User & array control
Cooling
Front-to-rear, 3-stage fans

Frequency

Frequency Response
10 Hz to 21 kHz (±1 dB)

Performance & Coverage

Distortion (THD+N)
< 0.05 %
Signal-to-Noise Ratio
>107 dB
Input Sensitivity
+21 dBu

Power

Rated Output Power
2 x 1400 W (2800 W total)
Power Supply
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption
700 W (1/8 max.@4Ω)

Connectivity

Channels
2
Channel Separation
< -80 dB
Direct Drive Output
70 V/100 V
Connections
Euroblock in/out, USB control, GPIO (power/preset)
Analog Inputs
2

Physical

Rack Space
2 RU
Colour
Black
Dimensions (H x W x D)
88 x 483 x 462.4 mm
Weight
16.2 kg (35.7 lb)

Environmental

Operating Temperature
+5°C to +40°C (40°F to +105°F)

All orders are final sale. Read our Refund policy.

Expert FAQs

How much power does the Dynacord C2800FDi deliver?

The Dynacord C2800FDi has a rated output of 2 x 1400 W (2800 W total) according to Dynacord.

How many channels does the Dynacord C2800FDi have?

The Dynacord C2800FDi has 2 amplifier channels, as listed in the Dynacord specifications for this model.

Can the Dynacord C2800FDi drive 70 V or 100 V lines?

The Dynacord C2800FDi offers direct drive output for these line voltages: 70 V/100 V.

What connections does the Dynacord C2800FDi have?

The Dynacord C2800FDi connections are listed as: Euroblock in/out, USB control, GPIO (power/preset).

Which software configures the Dynacord C2800FDi?

The Dynacord C2800FDi is set up with Dynacord SONICUE sound system software, which the maker describes for levels, EQ and system configuration.

Does the Dynacord C2800FDi have built-in DSP?

The Dynacord C2800FDi lists DSP as: Yes (FIR Drive), with a sample rate of 48 kHz.

What power supply does the Dynacord C2800FDi need?

The Dynacord C2800FDi operates from 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured).

How is the Dynacord C2800FDi mounted?

The Dynacord C2800FDi mounting is listed as: 2 RU.

Where can I buy the C2800FDi in the UAE?

CorporateAV.ae is an authorised dealer of Dynacord in the UAE and supplies the C2800FDi, with same-day or next-day delivery subject to availability. Request a project quote, call +971 56 498 8088 (+971 56 498 8088), WhatsApp us or email info@corporateav.ae (info@corporateav.ae).