Dynacord

Dynacord power amplifiers, zone mixer amplifiers, audio processors and controllers for installed sound, live sound and multi-zone buildings.

32 products

Dynacord amplifiers and audio processing

Dynacord is a German professional audio brand that has built sound systems since 1945. This collection brings together its power amplifiers, zone mixer amplifiers, audio processors and system controllers for installed sound, live sound and multi-zone buildings.

Most amplifiers include built-in DSP and are set up in SONICUE, the Dynacord sound system software. For related equipment, see Power Amplifiers, Audio Processors and Mixers.

Dynacord IPX20:4 networked DSP power amplifier

Choosing a Dynacord amplifier or processor

IPX and IX networked DSP amplifiers

The IPX series covers IPX5:4, IPX10:4, IPX10:8 and IPX20:4, with 1,250 to 5,000 W per channel and Dante audio with OCA/AES70 control. The IX series, IX15:4, IX30:4, IX30:8, IX60:4 and IX60:8, adds powerTANK output, a DSP matrix mixer and Dante in 4-channel and 8-channel versions.

TGX, L and C amplifiers

The TGX10 and TGX20 are 4-channel touring amplifiers with DSP, Dante and AES3 inputs, and the SR20TGX is a touring rack that houses three TGX20 amplifiers. The L1300FD, L1800FD, L2800FD and L3600FD are 2-channel DSP amplifiers for live sound, and the C1300FDi, C1800FDi, C2800FDi and C3600FDi are the install versions with direct drive for 70 V lines.

V and U series zone amplifiers

The V600:2 and V600:4 are compact zone amplifiers with 600 W of power sharing, and the U30:1M, U60:1M, U120:1M and U240:1M are single-channel mixer amplifiers with microphone inputs and ducking. The U120:1 and U240:1 are install power amplifiers for the same range.

Audio processors and mix engines

The VZX-8 is an 8-zone audio processor with 20 sources, and the MXE5-64 is a DSP matrix mix engine with 64 x 64 Dante channels.

Paging and touch panel control

The UCS-1 call station pages one zone from a U series amplifier, and the TPC-1 is a 5.7 inch touch panel controller for SONICUE systems.

Dynacord U120:1M single-channel mixer amplifier

Where Dynacord systems are used

Restaurants, retail floors, hotels and schools use the zone amplifiers and the VZX-8 for background music and paging. Houses of worship, campuses and venues use the networked IPX and IX amplifiers with Dante, and touring rigs and clubs use the TGX and L series.

Dynacord VZX-8 8-zone audio processor

Planning a Dynacord system

Before ordering, check:

  • Load type: check whether the speakers run on 4 or 8 ohm lines or on 70 V or 100 V distributed lines, and compare it with the direct drive rows on each product page.
  • Channels and power: match the channel count and the power per channel to the speaker list.
  • Network: choose an IPX, IX or TGX model when the project uses Dante audio and OCA/AES70 control.
  • Mains and rack space: check the power supply, rack units and depth before ordering.

Matching amplifiers and processors from other brands are in Power Amplifiers and Audio Processors.

Dynacord families in this collection

The range falls into four groups.

To plan an audio project, use Request a Project Quote with the zone list and the speaker load you need.

Applications and technical planning

  • Restaurants, retail and hospitality

    Zone mixer amplifiers and the VZX-8 processor handle background music and paging.

    Explore Mixers
  • Houses of worship, campuses and venues

    Networked IPX and IX amplifiers with Dante and DSP cover larger installed systems.

    Explore Audio Processors
  • Touring, clubs and live events

    TGX and L series amplifiers give rack-ready power with the loudspeaker tuning built in.

    Explore Power Amplifiers

Frequently asked questions

What Dynacord products does CorporateAV.ae supply?

CorporateAV.ae is an authorised dealer / partner of Dynacord in the UAE, and this collection covers IPX, IX, TGX, L, C, V and U series amplifiers, the UCS-1 call station, the VZX-8 zone processor, the MXE5-64 matrix mix engine and the TPC-1 touch panel controller.

Each listing names the model and the specifications published on the Dynacord product page, including channels, power, connections and weight. Request a Project Quote for a full system and the team will confirm availability and delivery to the UAE.

Which Dynacord amplifier suits a Dante installation?

The IPX series is the networked install range, with 4-channel and 8-channel models from 1,250 W to 5,000 W per channel and Dante audio with OCA/AES70 control. The IX series adds a DSP matrix mixer, powerTANK output and ghostPOWER over PoE.

The TGX touring amplifiers also list Dante and AES70/OCA. Each product page gives the exact channel count and network protocol, so match it to your Dante network.

Can Dynacord amplifiers drive 70 V and 100 V lines?

Yes, several models do. The C series install amplifiers, the V series zone amplifiers and the U series mixer and install amplifiers list direct drive output for 70 V and 100 V distributed lines, and the IPX series switches outputs between low impedance and 70 V or 100 V.

The TGX amplifiers list direct drive as No. Check the direct drive row on the product page before pairing an amplifier with a distributed line system.

What are the Dynacord U series mixer amplifiers?

The U30:1M, U60:1M, U120:1M and U240:1M are single-channel mixer amplifiers rated 30, 60, 120 and 240 W. They have four inputs, including two mic/line inputs, phantom power, a priority emergency input and VOX ducking that lowers music during announcements.

The U120:1 and U240:1 are install power amplifiers, and the UCS-1 call station adds one-zone paging. Request a quote with the zone list so the team can match the right model.

How do I configure a Dynacord amplifier?

Dynacord amplifiers with DSP are set up in SONICUE, the Dynacord sound system software, which covers levels, EQ, FIR filters, delay and limiters. The C series connects by USB, while the IPX, IX and TGX models are controlled over the network with OCA/AES70.

The MXE5-64 matrix mix engine and the TPC-1 touch panel controller are part of the same SONICUE system. Each product page lists the control connections for the model.

What does the Dynacord VZX-8 do?

The VZX-8 is an 8-zone audio processor that mixes 20 sources into 8 independently processed zones, with 8 mic/line inputs and full-matrix DSP routing. It is configured from any browser and has two RJ45 accessory ports for call stations and wall panels.

It links to V series amplifiers over RJ45. The product page lists the inputs, outputs, latency and rack mounting details for planning a multi-zone building.

What is the Dynacord MXE5-64?

The MXE5-64 is a DSP matrix mix engine for 76 x 72 channels of 48/96 kHz processing over Dante and AES67, with AES70/OCA control. It has 12 mic/line inputs, 8 line outputs, 64 x 64 Dante channels and 8 GPIO connections in a 1 RU case.

It is designed in SONICUE together with the IPX, IX and TGX amplifiers, and the TPC-1 touch panel can control it. Check the product page for the full I/O list.

Which Dynacord amplifiers suit live sound and touring?

The TGX10 and TGX20 are 4-channel touring amplifiers rated 4 x 2500 W and 4 x 5000 W, with FIR-Drive DSP, Dante and AES3 inputs and a front-panel touch screen. The SR20TGX is a touring rack with three TGX20 amplifiers.

The L series offers 2-channel DSP amplifiers from 2 x 650 W to 2 x 1800 W with XLR and NL4 connectors. Each product page lists power, connections and weight.

What power supply do Dynacord amplifiers need?

The supply depends on the model. The IPX, IX, TGX, V and U series list a 100 to 240 V AC input at 50 to 60 Hz, while the C series is factory configured for 100, 120, 230 or 240 V.

Always check the power supply row on the product page against the UAE mains supply before ordering, and ask the team to confirm the regional version. Rack space and power consumption are listed for each model too.

How do I choose the right Dynacord amplifier for my project?

Start with the speaker load: 4 or 8 ohm, or 70 V or 100 V distributed lines. Then count the zones or channels, choose the power per channel and decide whether the project needs Dante and network control.

Single-zone rooms suit a U series amplifier, multi-zone buildings suit the VZX-8 with V series amplifiers, and larger networked systems suit IPX or IX. CorporateAV.ae can quote a full system, so Request a Project Quote with the zone list.

For help confirming the technical requirements for your project, contact CorporateAV: Call +971 56 498 8088, WhatsApp +971564988088, or email info@corporateav.ae.

Need help choosing the right solution?

CorporateAV’s AV specialists can help select the right products and system for your room, application and requirements.

Request a Project Quote

Dynacord

Fields marked * are required.

Include your country code, for example +971 for the UAE.
Tell us about the location, application, operating hours and any existing equipment.