A meeting room control system is a touch panel or button pad, connected to an AV controller, that runs the room equipment for you: one press switches on the display, selects the laptop or video call, sets the volume and lowers the screen. It replaces a drawer of remote controls with one simple interface, so meetings start on time and fewer calls go to IT.
This guide explains how control systems work, the main types, how room booking panels fit in, which setup suits each room size, and what to check before you buy. It is written for offices, schools, hotels and government buildings in Dubai, Abu Dhabi and across the UAE.
How a meeting room control system works
Every control system has three parts:
- The user interface: a touch panel on the table or wall, a button pad by the door, or a volume knob.
- The controller: a small processor that stores the room programming. It can be a separate box or built into the button pad.
- The controlled devices: displays, projectors, motorised screens, cameras, audio processors, lighting, blinds and sometimes air conditioning.
When someone presses Present, the controller sends a sequence of commands: display on, input HDMI 1, screen down, lights dimmed, volume to a set level. When someone presses Room off, it reverses the sequence, so nothing is left running overnight.
The controller reaches each device through one of four connection types:
| Connection | How it works | Good to know |
|---|---|---|
| Ethernet (LAN) | Commands over the network | Can also read device status, such as whether the display is on |
| RS-232 serial | Direct cable to the device control port | Very reliable, common on commercial displays and projectors |
| IR (infrared) | An emitter copies the remote control | One-way only, use when a device has no other control port |
| Relay / GPIO | Simple contact closure | Used for screens, blinds, lifts and occupancy sensors |
Commercial displays, such as the signage displays and interactive panels we supply, usually have LAN and RS-232 control. Consumer TVs often accept only IR, which is less reliable.
The main types of room control
| Type | Best for | Examples |
|---|---|---|
| Video conferencing touch controller | Teams and Zoom rooms | Logitech Tap, Logitech Tap IP, Yealink CTP18 |
| Button pad with built-in controller | Classrooms, huddle rooms, simple meeting rooms | Biamp Impera Echo Plus, Biamp Impera Uniform |
| Touch panel with AV controller | Boardrooms, training rooms, divisible rooms | Biamp Apprimo Touch with Impera Tango |
| Audio control pad | Rooms with a Tesira audio system | Biamp Tesira TEC-1i, Apprimo TEC-X |
| Room booking panel | Every shared meeting room door | Logitech Tap Scheduler, MAXHUB Panel SP10 |
Video conferencing touch controllers
A conferencing controller runs the meeting platform itself: join with one tap, mute, camera control and content sharing. In a Microsoft Teams Room it is the main interface, and the room system can often switch the display on and off through HDMI-CEC. The Logitech Tap connects to the room computer over USB, while the Logitech Tap IP uses a single PoE network cable. The Yealink CTP18 is an 8-inch touch panel for supported Yealink conferencing systems. Many small and medium rooms need nothing more.



Button pads with a built-in controller
A wall button pad such as the Biamp Impera Echo Plus 8USW has its own controller, with Ethernet, serial, IR and GPIO connections. Eight labelled buttons cover display on and off, input selection and volume. The Biamp Impera Uniform 8U works the same way, with an E Ink label display so button names can change with the room. Both suit classrooms and rooms where people bring a laptop, and need no separate control processor.


Touch panels with an AV controller
Larger rooms with several displays, cameras, lighting scenes or a divisible wall need more than a few buttons. A touch panel such as the Biamp Apprimo Touch 10 or Apprimo Touch 7 shows custom pages for each task, while an Impera Tango controller does the work in the background. The Tango combines serial, IR, GPIO, relays and Ethernet device control, and can host up to five compatible touch panels.
Audio control pads
When the room audio runs on a Biamp Tesira or TesiraFORTÉ processor, a small control pad gives users volume and presets without a full control system. The Biamp Tesira TEC-1i is a PoE in-wall control with an OLED display, and the Apprimo TEC-X 1000 adds a rotary knob and up to six programmable on-screen buttons. See meeting room audio for how these fit with ceiling microphones and speakers.
What room booking panels add
A room booking panel is a small touch screen outside the meeting room. It shows whether the room is free, lists the next meetings and lets people book or extend the room on the spot. The Logitech Tap Scheduler has a 10.1 inch touchscreen and coloured LED lights, so free and busy rooms can be seen from across the office. The MAXHUB Panel SP10 is an 11 inch scheduling panel for Microsoft Teams Rooms.
Booking panels run the scheduling app of your meeting platform, such as Microsoft Teams Rooms or Zoom Rooms, and read the room calendar. A booking made at the door appears in Outlook, and a booking made in Outlook appears at the door. Many booking apps can also release a room automatically if nobody checks in, which frees up rooms that were booked and not used.
Example setups by room size
| Room | Typical control | Booking |
|---|---|---|
| Huddle room, 2 to 6 people | Video bar with its touch controller, such as Logitech Tap IP | Booking panel if the room is shared |
| Meeting room, 6 to 12 people | Conferencing controller on the table, plus a Biamp Impera Echo Plus wall pad for laptop presentations | Logitech Tap Scheduler or MAXHUB Panel SP10 at the door |
| Boardroom | Biamp Apprimo Touch panel with Impera Tango for displays, cameras, audio, lighting and blinds | Booking panel at each entrance |
| Training or divisible room | Touch panels and a controller that join or split the displays and audio when the wall opens | One panel per room part |
| Classroom | Biamp Impera Uniform or Echo Plus pad for the display or projector and sound | Usually not needed |
| Whole floor | The same layout and labels in every room | Panels at every door, managed by IT through the meeting platform |
Planning checklist before you buy
- List every device in the room and check its control port: LAN, RS-232, IR or relay.
- Decide the meeting platform: Microsoft Teams Rooms, Zoom Rooms or BYOD (laptop based).
- Agree the buttons users actually need. Fewer, clearly labelled buttons work better than many.
- Plan network points and PoE switch ports for panels, controllers and booking panels.
- Plan cable routes from the controller to each device, including the screen and blinds.
- Check that the room calendars (room mailboxes) exist before booking panels are installed.
- Ask for the programming to be documented, so later changes are quick.
Common mistakes to avoid
- IR-only displays: the controller cannot tell if the display is on or off, so buttons can get out of step. Choose commercial displays with LAN or RS-232 control.
- Too many pages: a touch panel with ten pages of settings confuses users. Keep everyday tasks on the first page.
- No booking system in a busy office: people walk between rooms looking for a free one. Booking panels at each door solve this.
- Different interfaces in every room: use the same layout and labels across the building so people know where to press.
- No network plan: panels, controllers and booking panels all need network ports, often with PoE. Plan them with IT before installation.
Key terms explained
- AV controller: the processor that stores the room programming and sends commands to each device.
- RS-232: a serial control port found on most commercial displays and projectors.
- PoE (Power over Ethernet): power and network on one cable, used by touch panels and booking panels.
- HDMI-CEC: a control signal over HDMI that lets a room system switch a display on and off.
- GPIO and relays: simple on and off contacts for screens, blinds and sensors.
- Room mailbox: the calendar account a booking panel reads to show and make bookings.
Get the right control system for your rooms
CorporateAV.ae designs, supplies and installs meeting room control and room booking systems across the UAE, and is an authorised dealer of Biamp, Logitech, MAXHUB and Yealink. See our meeting room control and room booking solutions, browse room control and scheduling panels, or request a project quote.






